SmartDL Rim Gate Smart Door Lock - Operations Manual

Internal Assembly Functionality

1. Adding new Fingerprint User

1. Make sure you are working from inside to make sure you don't get locked out.
2. Swipe the admin card on the card reader on the internal assembly to enter the setup mode. Now,you should a flashing green light next to the fingerprint sensor.
3. Place the new user's finger on the fingerprint reader. Repeat this process for 4 times for the same fingerprint.
4. This should register the fingerprint on the device.
5. If you want to add more fingerprints, repeat the step 3.
6. Swipe the admin card once again to exit setup mode.
7. Try the newly registered fingerprint on the fingerprint reader and it should turn green and should unlock the locking mechanism.

2. Adding a new Card User

1. Make sure you are working from inside to make sure you don't get locked out.
2. Swipe the admin card on the card reader on the internal assembly to enter the setup mode. Now,you should a flashing green light next to the fingerprint sensor.
3. Place the new Card on the card reader. This should register the Card on the device.
4. If you want to add more fingerprints, repeat the step 3.
5. Swipe the admin card once again to exit setup mode.
6. Try the newly registered Card on the card reader and it should turn green and should unlock the locking mechanism.

3. Deleting a Card or a Fingerprint User

1. Make sure you are working from inside to make sure you don't get locked out.
2. Swipe the admin card 2 times on the card reader on the internal assembly to enter the delete mode. Now,you should a flashing red light next to the fingerprint sensor.
3. Place the Card or the Fingerprint you want to delete on the reader. This should delete the selected Fingerprint or the Card.
4. If you want to remove more Cards or fingerprints, repeat the step 3.
5. Swipe the admin card once again to exit setup mode.
6. Try the un-registered Card or the Fingerprint on the reader reader to make sure they are unregistered.